
17
Figure 13 Air filter cleaning
7.4 Spark plug maintenance
Spark plug recommendation
:
LG R6TC or WR7DC
To ensure the normal operation of the engine, the spark plug gap must be appropriate and
spark plug must have no coke.
1. Disassemble spark plug cap.
2. Remove the spark plug with a spark plug wrench.
Figure 14 Disassemble spark plug
3. Clean the coke on the bottom of spark plug.
4. Check spark plug visually, if it has gap, then scrap it. If you use the spark plug again, clean
the spark plug with brush.
5. Use feeler gauge to measure the spark plug gap, the gap should be 0.5-0.75mm
(
0.02-0.03in
)
, if necessary, bend a electrode to adjust it.
6. Assemble the spark plug with hand and avoid screw dislocation.
7. After assembling a new spark plug with hand, tighten 1/2 circle and press the washer. If it is
an old spark plug, only need 1/8 or 1/4 circle.
8. Reinstall the spark plug cap.
7.5 Spark Arrestor repair,
see Figure 15
.
The spark plug should be fixed, otherwise it becomes very hot and will damage the
generator.
Содержание Pmi3000
