Praher Plastics AQUASTAR mp6 plc, Руководство по эксплуатации

Страница: 31 / 44

11 www.praherplastics.com
Wiring diagram 11
11.1 Connection of the power supply
11.1.1 With 230VAC power supply (look at 13.2)
11.1.2 Without 230VAC power supply:
11.1.3
With PLC power supply
Voltage range:
12-24 VAC/DC
If a voltage of 12-24VDC is applied
to the clamps near the SPS inputs
and the Jumpers ST13 and ST16
are set the Aquastar can be driven
by the PLC power supply.
The Jumpers can only be set if the
Aquastar is supplied by the PLC
inputs!
They must be removed if it is supplied
by the 230VAC power supply or the
24VAC/DC connectors!
However if there is no voltage
connected to the +24VDC connectors it
is possible to set the jumpers. In this
case only GND and the control lines are
allowed to be connected.
GND must be connected in any case!
Voltage range:
100-230 VAC