PRACTIXX PX-RRM-600WI Скачать руководство пользователя страница 32

24 | GB

When the mower is turned upside down, the 

mains  switch  must  always  be  off.

  The mains 

switch  should  be  turned  off  during  all  work  on 

the mower’s bottom frame, e.g. when cleaning or 

replacing the blades.

Safety instructions - Rechargeable battery and 

charging unit

Rechargeable battery and charging unit

Read the instructions before charging. Make sure 

your charging unit matches your local AC sup-

ply. Make sure that the connection between the 

charging unit and the rechargeable battery pack 

corresponds to the correct models. Longer ser-

vice life and better performance can be achieved 

if the rechargeable battery is charged when the 

air temperature is between 18 °C and 25 °C. Do 

not charge the rechargeable battery in air tem-

peratures below 5 °C or above 40 °C. These in-

structions are important as this can prevent seri-

ous damage to the rechargeable battery.

WARNING: 

Lithium-ion batteries may explode or cause fire if dis

-

assembled, short-circuited or exposed to water, fire 

or high temperatures.  Proceed with caution, do not 

open the rechargeable battery and do not expose it 

to electrical/mechanical stress. Avoid storing the bat-

teries in direct sunlight.

•  Do not disassemble, open or crush the rechargea-

ble battery.

•  Do not short-circuit the rechargeable battery.  Do 

not store rechargeable batteries haphazardly in a 

box or drawer where they can short-circuit each 

other or be short-circuited by conductive materials. 

•  When the rechargeable battery is not in use, keep 

it away from other metal objects such as paper 

clips, coins, keys, nails, screws or other small met-

al objects that could connect from one terminal to 

the other. Short-circuiting the battery terminals can 

cause burns or a fire.

•  Do not expose the rechargeable battery to heat or 

fire.

 Avoid storage in direct sunlight.

•  Do not subject the rechargeable battery to me-

chanical shocks.

•  Do not allow the liquid to come into contact with 

the skin or eyes in the event of a battery leak.  If 

contact  has  been  made,  wash  the  affected  area 

with plenty of water and seek medical attention.

•  Seek medical attention immediately if a cell of the 

rechargeable battery has been swallowed.

•  Keep the rechargeable battery clean and dry.

•  The rechargeable battery performs best when op-

erated at normal room temperature (20 °C ± 5 °C).

•  Do not place any objects on the housing or the 

charge station of the product.

•  Never allow people to sit on the robot. Never lift the 

robot to inspect the cutting edge or carry it during 

operation. Do not place hands or feet under the ro-

bot during operation.

•  The product must not be operated with damaged 

guards, blade plate or housing.  Furthermore, 

it must not be operated with damaged blades, 

screws, nuts or cables.  Do not connect or touch 

damaged cables until they have been disconnect-

ed from the power supply.

•  Do not use the product if the POWER ON/OFF button 

and the STOP button are not working properly.

• 

Always switch the product off via the ON/OFF but

-

ton if it is not in use. The product will only start if 

the POWER ON/OFF button is switched on and 

the correct PIN code is entered.

•  If the power cord is damaged during use, press the 

“STOP” button to stop the robot and unplug the 

mains cable from the socket.

•  Riwall Pro does not guarantee full compatibility 

between the product and other wireless systems 

such as remote controls, transmitters, in-ground 

electric fencing of livestock pastures or similar.

•  Metal objects in the ground (e.g. reinforced con-

crete or anti-mole nets) can cause the mower to 

stop. The metallic objects may cause interference 

with the loop signal, which may cause the mower 

to stop.

•  The operating and storage temperature is 5–50 

°C. The temperature range for charging is 5–45 

°C. If the temperature is too high, the product may 

be damaged.

•  Never use or charge the robot in explosive and/or 

flammable environments.

•  Do not use the robot mower if a sprinkler is run-

ning. In this case, program the robot and the sprin-

kler so that they do not operate simultaneously. 

Do not wash the robot with high pressure water 

jets or immerse it partially or completely in water 

as it is not waterproof.

•  Use only the charging unit and mains power unit 

provided by the manufacturer.  Improper use may 

result in electric shocks, overheating or leakage of 

corrosive liquids from the battery.

•  Do not position the power supply unit at a height 

where it could be submerged. Do not set the mains 

power unit down on the ground.

•  Do not cover the power supply unit. Condensation 

can damage the power supply unit and increase 

the risk of electric shock.

•  If liquid leaks, wash the battery with water / neu-

traliser.

In the event of eye contact, consult a doctor.

Содержание PX-RRM-600WI





































































Отзывы: