Power up
0000
PASSW.
Txt 1
ON
OFF
3
3
NO
ADV.SET
Txt 2
0000
9999
1 2
NO
YES
1 2
3
DIR
CH1.FUN
Txt 7
DIR
INV
1 2
3
YES
ADV.SET
Txt 2
3
DIR
CH2.FUN
Txt 7
1 2
3
DIR
INV
1.1
1.0
Directly to [
EN.SIL
]
if SIL-lock is enabled
Version No. V3R0
11
9203 Solenoid / Alarm Driver
Safety Manual
Continued on the page
Routing diagram ADV.SET
To default state 1.0
routing diagram
If no key is activated for 1 minute, the display will return to the default
state 1.0 without saving configuration changes.
1
Increase value / choose next parameter
2
Decrease value / choose previous parameter
3
Accept the chosen value and proceed to the next menu
Hold
3
Back to previous menu / return to menu 1.0 without saving
1.0 = Default state
Linie 1 shows status for channel 1
and channel 2.
Linie 2 shows output status for
channel 1, output current or tag no.
Linie 3 shows output status for
channel 2, output current or tag no.
Line 4 indicates whether the module
is SIL-locked.
1.1 = Only if password-protected.
1.2 If password has been set.
Line 1 symbols:
= OK. Flashing
= error.
Line 2 and 3 symbols:
ON =
channel 1 ON
OFF
channel 2 OFF.
Line 4 symbols:
Static dot = SIL-locked.
Flashing dot = Not SIL-locked.
= output is active.