9203 - Product Version 9203-001
13
Visualisation in 4501 of hardware / software error
Readout at hardware error:
Error search
Readout
Cause
Communications test 4501 / 9203
NO.CO
Connection error
EEprom error - check configuration
FL.ER
Configuration error or crc
mismatch, recovery confi-
guration is loaded
Hardware error
DE.ER
Invalid recovery configura-
tion in device
Hardware error
FC.ER
Invalid code checksum
in 4501
EEprom error - check configuration
CO.ER
Invalid configuration
(CRC or data)
Hardware error
CA.ER
Factory calibration error
Hardware error
HW.ER
HW setup -
configuration mismatch
Hardware error
OC.ER
Main output controller
communication error
Hardware error
MS.ER
Main internal supply
out of bounds
Hardware error
MI.ER
Main initialisation
selftest failed
Hardware error
MC.ER
Main flash or ram
selftest failed
! All error indications in the display flash once per second. The help text explains the error.
Errors affecting both channels are shown as error on channel 1 - and the line showing channel 2 is
blank.
Hardware error can be reset in two ways. Either step through the menus (if the other channel is to
stay in operation) or power cycle the device.
CONTENTS