Needle Nose Pliers
Grease
Screw Cement
Round Cutter & Sander
Sharp Hobby Knife
Hex Wrench
1.5mm
2.0mm
Ball Differential
Grease
Ware Cutters
SP Knife Edge Reamer
A new battery must be charged before it is used. Refer to the charger instruction manual for charging.
Set up the radio control system as indicated below.
Battery
Transmitter
Off
On
Charger
Eletronic Speed
Controller
Receiver
Servo
Install batteries.(Transmitter)
Extend the antenna.(Transmitter)
Connect the battery to the ESC.
Extend the antenna.(Receiver)
Switch on both the transmitter and receiver.
Make sure the servos are in command.
Switch off both the transmitter
and receiver.
Retract the antrnna.
(Transmitter)
Center the trims.
Off
On
Off
On
Silicon Diff Oil
Cross Wrench
5.0mm-5.5mm
7.0mm
Std. Short
Low Short
(Low Profile Servo)
6.5-17.5t
02
HEALTH WARNING
This model is a high performance radio controlled racing product that is
designed for use on R/C car race tracks. If it is misused it could cause injury
to the operator or others. Many of the items in this kit are small enough to be
accidentally swallowed; therefore, it is not suitable for young children. All
items, inclusive of liquids, contained in this kit are not intended for human
consumption. Rotating parts of the car may cause injury if not handled with
care.
