6/8
Pro Stage Zoom_EN.doc
The unit is supplied with a power cord. Should any other connections be required they must be
carried out with the following configuration:
L (live) =brown
E (earth) =yellow/green
N (neutral) =blue
IMPORTANT
It is essential that each projector is correctly earthed and the electrical installation conforms to
all relevant standards.
To ensure the reliability of the projector it should be kept clean. The lens and reflector should be
regularly cleaned to maintain an optimum light output.
Do NOT use any glass cleaner or any type of solvent on the reflector.
Before cleaning the
reflector remove the lens barrel and the barrel holder so you can access the reflector from the front of
the fixture. When cleaning the reflector use a damp, clean, soft, lint-free cotton cloth with amide,
soapy water solution and gently wipe the reflector, and then remove any soapy water residue with a
clean, soft, lint-free cotton cloth dampened with water.
Do not use paper towels or harsh materials
to wipe the reflector.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or
particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics. It is
recommended to clean the lens at least once every 20 days and clean the reflector at least once
every 30 / 60 days.
Do not use any organic solvent, e.g. alcohol, to clean the housing of the
projector.
Power supply: 230V AC 50Hz
Lamp: GKV 600W
（
Manufacturers Rated Lamp Life:250 hours
）
Socket: G9.5
15°-30° Pro Stage Zoom, PR-3057, Net Weight: 10.2kg
KEEPING THE PROJECTOR CLEAN
POWER CONNECTIONS
TECHNICAL SPECIFICATIONS
