4/8
Pro Stage Zoom_EN.doc
Hole for Safety Cable
Passing through
Lens-Barrel
Locking Knob
Blade or Gobo Holder
Displacing the cover will appear the slot
for inserting the gobo with device
Cover Screw
Cover
Lamp Housing Bolt
Lamp Adjustment
Fixing Holes
Bracket
Lens-Barrel
Retaining Block
for Filter Holder
Locking Knob
Adjustment Knob
This unit has been designed to be hung.
Hang the unit via its bracket using M12 size bolt(s). When
you want to adjust the angle of the body of the projector, you only loosen the locking knob and then
adjust the angle of the body. You can change the lens-barrel by loosening 2 lens-barrel locking knobs
and rotate the lens-barre
l
by loosening 2 lens-barrel holder rotating knobs. Always ensure that the
projector is firmly positioned to avoid vibration and slipping, and always ensure that the structure to
which you are attaching the projector is secure and is able to support the weight of each Pro Stage
Zoom.
For safety the unit should have a secondary fixing with a safety cable through the hole on the upper of
the unit.
Locking lever
push button
30
°
2
5
°
20
°
15
°
Press the locking lever push button and lift it to unlock the adjustment knob.
To reduce the beam angle, rotate the adjustment knob clockwise. To enlarge the beam angle,
rotate the adjustment knob anti-clockwise.
Slide the adjustment knob forward or backward to soften or sharpen the edge.
Press the locking lever push button into the position until the beam angle and the edge are
established.
INSTALLING THE PROJECTOR
FOCUS AND ZOOM
