5/8
Pro Stage Zoom_EN.doc
Important:
Before installation the GKV lamp verify that the GKV lamp you use is suitable for the
voltage at your facility. Operating lamps beyond their rated voltage reduces lamp life and can cause
premature lamp failure.
Lamp Housing
Lamp
Lamp Housing Bolt
Lamp Adjustment
First, loosen the lamp housing bolt and pull the housing straight out from the back of the fixture as
shown above.
Holding the lamp with the base push down on the lamp base until the lamp is firmly seated. Make sure
that the lamp is fully seated, with the bottom of the lamp heat sink flush to the lamp housing casting.
To reinstall the lamp housing, center it on the reflector and the bolt hole, then tighten the lamp
housing bolt to secure the lamp housing in place.
NOTE:
To optimize light output it will be necessary to adjust the lamp adjustment. Adjust the lamp in
or out to get a proper focus via rotating the lamp adjustment by hand.
FITTING THE LAMP
