PR Lighting PR-8920, Руководство пользователя

Страница: 4 / 14

4/14
INSTALL THE LIGHTING FIXTURE
When the lighting fixture is used, put it on a flat surface or hang it. Make sure it is steady and secured.
When the lighting fixture is used at a high place, as the figure above, move the support to the top of the lighting fixture, connect a lamp
hook to the mounting hole reserved in the support by screws, and then hang the hook to mounting bar. Eventually, use the safety cord
provided to pass through the support and hang it as a second safety fixing.
CONTROL SYSTEM AND POWER CONNECTION
DMX 512
2 DATA-
DATA+ 3
1 GND
FUNCTION PIN
三芯
DMX OUT DMX IN
2
1
3
2
1
3
THREE-PIN
Connection between the controller and a lighting fixture and between one lighting fixture and another must be made with a 2
core-screened cable, with each core having at least a 0.5mm diameter. Please use the lighting fixture’s cannon 3- pin signal input and
output cables as connection. The 3-pin signal connections are connected as shown in the figure above.