PR Lighting CHAMELEON PR-2012H Скачать руководство пользователя страница 3

Chameleon manual.doc 

3/12 

 
 
 

The following points are important for safety as well as for the smooth 
installation and performance of the unit 

 
When unpacking and before disposing of the carton check there is no transportation damage before 
using the projector. Keep the carton  well  for future possible transportation. Should there be any 
damage caused by transportation, consult your dealer and do not use the apparatus. 
 
The projector is for Indoor use only, IP20. Use only in dry locations. Keep this device away from rain 
and moisture, excessive heat, humidity and dust. Do not allow contact with water or any other fluids, or 
metallic objects. 

The projector is not designed or intended to be mounted directly on to inflammable surfaces.

 

 
The projector is only intended for installation, operation and maintenance by qualified personnel. 
 
The projector must be installed in a location with adequate ventilation, at least 50cm from adjacent 
surfaces. Be sure that no ventilation slots are blocked. 
 
Do not project the beam onto inflammable surfaces, minimum distance is 3m. 

 3m   

 
Avoid direct exposure to the light from the lamp. The light is harmful to the eye. 
 
Do not attempt to dismantle and/or modify the projector in any way. 
 
Electrical connection must only be carried out by qualified personnel. 
 
Before installation, ensure that the voltage and frequency of power supply match the power 
requirements of the projector. Please use the lamp with the specified type and rating. 
 
It is essential that each projector is correctly earthed and that electrical installation conforms to all 
relevant standards. 
 
Do not connect this device to any dimmer pack. 
 
Make sure that the power-cord is never crimped or damaged by sharp edges.  Never let the  power-
cord come into contact with other cables. Only handle the power-cord by the plug. Never pull out the 
plug by tugging the power-cord. 
 
Never run the projector without a lamp. 
 
Switching the lamp on and off at short intervals will reduce the life of both the lamp and the projector. 
Occasional breaks will prolong the life of the lamp and the projector. 
 
There are no user serviceable parts inside the projector, do not open the housing and never operate 
the projector with the covers removed. 
 

Always disconnect from the mains, when the device is not in use or before 
cleaning it or before attempting any maintenance work.  

 
If you have any questions, don’

t hesitate to consult your dealer. 

 
 
 
 
 
 

SAFE USAGE OF THE PROJECTOR 

Содержание CHAMELEON PR-2012H













Отзывы: