PR Lighting AQUA LED 600 SPOT, Руководство пользователя, Страница: 7 / 30

7/30
Input Input Output
DMX Controller
DMX512
DMX Terminator
Input Output
NO.1 NO.2 NO.n
Gobo wheel1 Gobo wheel2
Metal effect
wheel
Color wheel
●
DMX TERMINATOR
In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents
electrical noise from disturbing and corrupting the DMX control signals.
The DMX terminator is simply an XLR connector with a 120
 (ohm) resistor connected across pins 2 and 3, which is then plugged
into the output socket on the last projector in the chain. The connections are illustrated below.
●
REPLACEMENT OF GOBOS
2
1
3
120
DMX TERMINATOR
CONNECTION
Connect a 120 (OHM) resistor
across pins 2 and 3 in an XLR plug
and insert into the DMX out socket
on the last unit in the chain.
PIN 3
PIN 2