PR Lighting AQUA LED 600 SPOT, Руководство пользователя, Страница: 5 / 30

5/30
Head
Yoke
Base
Warning
Please run the safety
cord through both safety
cordholes for safety
!
Safety cord hole
Safety cord
Clamp
Handle
●
TROUBLESHOOTING
PROBLEM ACTION
The projector doesn’t switch on

Check the fuse on the power socket.

Check the lamp.
The lamp is on but the projector doesn’t respond
to the controller

Make sure that the fixture’s start address is right

Replace or repair the XLR signal cable.
The projector functions intermittently

Make sure the fan is working well or fans and their shields are not blocked
Beam appears dim, Low in brightness

Make sure the lamp is within its lifespan

Remove dust or grease from the lenses.
The project image appears to have a halo

Carefully clean the lamp, optical lenses and other components.
Heavily Defective Beam

Check if lens are in good condition(not cracked)

Clean dust or grease on the lens.
3. APPEARANCE
4.
INSTALLATION
●
RIGGING
Before moving a projector, Please lock Pan and Tilt. Before its operation, please unlock them. It’s forbidden to run a
projector with power while it is locked