O
UTDOOR ENCLOSURE TYPE
MINI
HANDBOOK
6
Module Female Receptacle Cleaning (only recommended if problems are being experienced)
Either use an optical cleaning stick or twist a cleaning tissue to form a stiff probe, moisten either with IPA.
Gently push the probe into the receptacle and twist around several times to dislodge any dirt.
Repeat the above process with a dry tissue.
Using the air duster, blow away any residue from the receptacle.
Important Notes
IPA is flammable. Follow appropriate precautions / local guidelines when handling and storing.
IPA can be harmful if spilt on skin. Use appropriate protection when handling.
It should only be necessary to clean the female receptacles on the modules if problems are being
experienced.
Never inspect an optical fibre or connector with the naked eye or an instrument unless you
are convinced that there is no optical radiation being emitted by the fibre. Remove all
power sources to all modules, and completely disconnect the optical fibres.
SC/APC Connectors
To connect SC/APC optical connectors follow these steps:
Remove the plug protective cover.
Align the connector keyway slot in the adaptor to the key of the plug.
Gently push the plug-into the adapter until a click is heard and the connector locks.
To disconnect follow these steps:
Grip the body of the plug and gently pull the plug from the adaptor, replace the protective cover.
Only connect SC/APC cable to SC/APC.
Minimum bend radius
Because optical fibre is made of glass, it is important not to subject it to excessive stress. For this reason,
each type of cable has a minimum bend radius (MBR) specification, beyond which the cable cannot be bent
without permanent damage occurring.
The minimum bend radius (MBR) of fibre optic cable fitted to
ViaLite
modules is 50mm. MBR specifications
for
ViaLite Communications
supplied fibre optic cables are given in the
ViaLiteHD
RF Link Handbook.
