PPM Sentinel 3, Руководство по системе и аксессуарам

Страница: 43 / 59

S3x-HB-1-11
43
Each line of the script file will be sent to the Sentinel 3 as a command, and any applicable responses will
be displayed in the manual command area.
Lines beginning with a “#” character will be treated as comments, and ignored by the script processing
engine. In addition to the Sentinel 3 external control command set, the script engine defines two control
directives (indicated with a “$” symbol at the start of the line):

$PAUSE n
– Will pause script execution for
n milliseconds. Omitting n shall present a dialog box
which pauses script execution until dismissed by the user.

$REPEAT
– will continue to repeat all commands in the script prior to this line. Script execution can
then only be stopped by the user pressing the “Stop Script” button
When running script files, it is recommended that the Sentinel 3 Remote View is disabled to reduce
network traffic and minimise command response times.
The application also allows advanced users to manually input commands to the Sentinel 3 system. This
must be enabled in the Options menu (see Figure 51). Responses received from the Sentinel 3 system
will be displayed below the command entry textbox.
Figure 51: Options Menu
The Remote Agent software allows the user to copy the log file from the Sentinel 3 device over the
USB/LAN connection (shown in Figure 52/Figure 53). This will, by default, be saved as a text file with the
extension “.s3l”. The destination for the copied log file is configurable by the user. The log file will be a
copy of the currently active log file on the Sentinel 3; therefore it may contain incomplete log entries at the
end (these will have been in the process of writing to the log when the copy process was initiated).
Figure 52: File Menu
Figure 53: Log File Copy Dialog