PPE Stage 4, Руководство по установке

Страница: 8 / 16

Stage5 Installation Guide
8
Remove the Converter housing and Stator support assembly. If your Stator has
the early style Babbitt bushing, replace it with a new stator support bushing (not
furnished). It is not necessary to remove pump from Converter housing. Using
PTO cover bolt, install as illustrated. Depress main regulator valve stop and
remove retaining pin. Remove valve stop, no need to remove spring or valve.
Install steel shim on spring side of Plug, Reinstall Plug and Retaining Pin.
Stator
Step 14
Make sure all valves are free. Remove the rotating clutch module from trans -
mission by lifting and wiggle as you lift to avoid disturbing the main shaft lube to
the spacer position. Do not lift up on the main shaft. Disassemble the rotating
module and modify as per Valve Body Kit instructions. Converter housing on
bench provides a nice stand for working on and testing the module.