3
faCtory Default
Restore settings to factory default.
Operation:
1. The gate must be stopped;
2. Close the PROG jumper;
3. Press and release CMD button (1x);
4. Press and release the GRV button to enter the function;
5. GRV to set factory default, or CMD button or remove PROG jumper
(Cancel function).
PROGRAMMING TABLE
FACTORY DEFAULT
#1
OPENING COMMAND
#2
DELETING TRANSMITTERS
#3
GARAGE LIGHT TIME (LG)
#4
BRAKE
#5
TRAFFIC LIGHT TIME (SIN)
#6
REVERSÃL BY COMMAND
#7
MAGNETIC LOCK RAMP
#8
OPENING ADJUSTMENT OPENING
#9
MAXIMUM TIME COURSE A/F
#10
NOMINAL ENGINE TIME
#11
LIMIT SWITCH REVERSE BRAKE
#12
ELIMINATE BRAKE INERTIA
#13
ELIMINATE BRAKE INERTIA TIME
#14
FACTORY DEFAULT SET UP
GARAGE LIGHT
60 scg
BRAKE DRIVE TIME
150,0 msec
TRAFFIC SIGN
Turned on
ADJUSTMENT OPENING RAMP
0%
ROUTE A/F (STORED)
Turned off
ROUTE A/F PERMITED TIME
2 min
OPENING CONTROL
Allowed
REVERSAL BY COMMAND
Allowed
MAGNETIC LOCK RAMP
0%
ENGINE NOMINAL TIME
200,0 msec
LIMIT SWITCH REVERSE BRAKE
Enabled
ELIMINATE BRAKE INERTIA
Enabled
ELIMINATE BRAKE INERTIA TIME
22,0 msec
