Powtier Controls Limited
Air Curtain Controller
Instruction Manual
Significant Bit. To change the address to 0, set all 4 switches to 0 or Off. To change the
address to 15, set all 4 switches to 1 or On. To change the address to 1, set the left most
switch to On and the rest to Off. To change the address to 8, set the right most switch to On
and the rest to Off.
The base unit is shipped with a default address of 0.
Protection
There are two high speed fuses on the base unit to protect the switching devices for the heater.
External circuit breaker with the appropriate rating should be installed for the protection of
the installation.
Connection diagram
ACCIM
Page 6
5 March 2007
Issue 1.4
