page no. 17 of 36
Vision Mini
User Instructions Doc Ref M608 issue 1.0 June 2021.
The units are supplied with a paper template for marking the
holes necessary for installation.
Hold the template in the correct position with tape.
A
Holes for M8 dowels
B
Electrical connection area
C
Ø162 mm holes for air channelling
D
ø 16 mm condensate drain
E
anti-lifting bracket hole
A
B
C
D
E
IN
OUT
Preliminary warnings
The wall mounting bracket supplied as an accessory is
required to position the unit on the wall.
Make sure that:
• the wall supports the weight of the appliance
• the section of floor or wall does not concern piping or
electrical lines
• the functionality of load-bearing elements is not
compromised
Installation arrangement
The units can be positioned on the floor or on a high or low
wall.
The ..2.0 range of air conditioners without an external unit
are designed for indoor installation on a perimeter wall .
