page no. 4 of 12
CECx
Users, Installation & Servicing Instructions Doc Ref M503 issue 3.3 Jan 2020.
Regular servicing is essential to maintain efficient,
reliable and safe operation of the units. Users are strongly
recommended to have Calecons serviced by a qualified
person at least annually and preferably at the end of the
heating season.
Note: access must be maintained to the
Calecon units for servicing purposes.
WARNING: All Calecon units use electricity
to power them and contain moving parts,
the fan. It would be hazardous to tamper
with or attempt to service unless you are a
competent person in the field of Electrical work.
If you have any safety questions reference the servicing
and installation of this equipment please do not hesitate
to contact our head office for expert advice.
Your safety is paramount to us.
The Calecon unit you have installed is operated
automatically, by an inbuilt thermostat, to turn on when
the air temperature at high level exceeds the thermostat
setting.
The Calecon unit will automatically recirculate the
high level hot air in high roofed buildings drastically
reducing stratification and heat losses and minimise the
temperature gradient between low and high level.
The unit will turn off automatically when the air
temperature at high level falls below the setting on the
thermostat.
Mounted externally on the unit is the air temperature
sensing thermostat.
Units are fully pre-wired, fully tested and fitted with four
eyebolt suspension points.
In some installations a low level master control may be
installed to provide user control of the units.
Dim
Model
CECx 1400
CECx 2250
CECx 3350
CECx 4500
CECx 6500
A
Enclosure Width
499
599
654
808
808
B
Enclosure Depth
499
599
654
808
808
C
Enclosure Height
260.5
260.5
260.5
187
187
D
Overall Height
380
380
390
288
265
E
Suspension ctrs
288
388
443
597
597
F
Suspension ctrs
493.5
593.5
647.5
802.5
802.5
A
B
C
D
E
F
