12-16-13 Revision
1-STAGE SNOW THROWER
15
GB
Tip the handle forward slightly to allow the
rubber paddles on the auger to contact the
pavement and propel the snow thrower
forward. Pushing downward on the handle
will raise the auger off the ground and stop
forward motion.
Traveling
Excessive upward pressure on the
handle will result in premature wear
on the rubber auger paddles.
Always shut off engine, remove
key, and close fuel shut-off valve
when transporting unit on a truck
or trailer. Do not transport machine
while engine is running.
Use extra care when loading or unloading unit
onto trailer or truck.
Secure unit chassis to transport vehicle. Never
secure from rods or linkages that could be
damaged.
Transport
MAINTENANCE
Engine
Lubrication
Refer to the Engine Operator’s Manual.
Lubricate the pivot points on the auger clutch
lever and the spring at the end of the clutch
cable with a light oil once every season before
off-season storage.
At the end of the season or if the snow
thrower will not be used for 30 days or longer,
follow the storage instructions below.
Refer to the Engine Manual for
information on storing your engine.
Off-Season Storage
Run the engine until the fuel lines and
carburetor are empty and it stops due to
lack of fuel.
Remove the safety ignition key and allow
the engine to cool.
Lubricate the machine as instructed.
Clean the exterior of the engine and the
snow thrower thoroughly.
Touch up all rusted or chipped paint
surfaces; sand affected areas before
painting, and use a rust preventative to
prevent the metal parts from rusting.
T i g h t e n a l l l o o s e s c r e w s , b o l t s , a n d
locknuts. Repair or replace any damaged
parts.
Cover the machine and store it in a clean,
dry place out of the reach of children.
1.
2.
3.
4.
5.
6.
7.
