background image

3

IMPORTANT SAFETY INSTRUCTIONS

All operators must read, understand and practice the following safety instructions.  They will be repeated occasionally 

throughout this manual, and additional cautions may be added for specific cases.

• CAUTION:  

Operators must read and understand this 

manual completely before operating this equipment.

• CAUTION: 

  Make sure key switch is in the “OFF” 

position before installing pad.

• CAUTION: 

  Loose objects on the floor can become 

dangerous projectiles if struck by the high-speed pad.   

Remove them before operating this machine.

• CAUTION: 

  Keep hands and feet away from revolving 

pad.

• CAUTION: 

  Keep machine moving to prevent damage 

to finish or floor.

• CAUTION: 

  Make sure key switch is turned “OFF” 

and battery connector is unplugged from machine  

before performing any maintenance procedures.

• CAUTION: 

  Maintenance and repairs must be       

performed by authorized personnel.

• CAUTION: 

  Battery acid can cause burns.  When 

working on or around batteries, wear protective clothing 

and safety glasses.  Remove metal jewelry.  Do not 

lay tools or metal objects on top of batteries.

• CAUTION: 

  Do not operate this equipment in bare 

feet or with open-toed shoes or sandals.

• CAUTION: 

  Charging batteries generate explosive 

gases. 

 

• CAUTION:   

Make sure the charger has turned off 

before  disconnecting  it  from  the  batteries.    Charge       

batteries in a well-ventilated area with the tanks in  

the raised and locked position.

• CAUTION: 

  Store or park this machine on a level   

surface only.  Remove key from switch if machine is 

left unattended.

• CAUTION: 

  Do not operate machine or charger in 

areas where flammable liquids or gases are present.   

Do not use or pick up flammable chemicals or   

liquids with this machine.

• CAUTION: 

  Make sure all caution, warning an 

instructional decals are in place and legible. Replace  

damaged or missing labels.

• CAUTION: 

  These machines are designed for level 

floor operations only.  

DO NOT OPERATE

 on ramps or  

inclines unless adequate personnel are available  

for assistance.

• CAUTION: 

  Do not expose electrical components to 

water or other liquids.  To clean machine wipe down 

with a damp cloth.

• CAUTION:   

Do not draw current from the batteries 

with makeshift connectors, clips or contacts.

• CAUTION:   

Park the cleaner on a flat and level floor.

WARNING: 

 

DO NOT OPERATE MACHINE OR CHARGER IN AREAS WHERE FLAMMABLE 

LIQUIDS OR GASES ARE PRESENT.

DO NOT USE OR PICK UP FLAMMABLE CHEMICALS OR LIQUIDS WITH 

THIS MACHINE. 

DO NOT

 

SMOKE, LIGHT FLAMES OR MAKE SPARKS.

Содержание PFS20












Отзывы: