POWERWINCH PW2000, Инструкция по эксплуатации

Страница: 7 / 8

powerwinch.eu
11
Using the wireless remote control
The versatile wireless control system (STANDARD, XT, XT + or PROFI) includes
both a control unit (receiver) and a transmitter (remote control). If you have
bought a winch with a remote control included, the control unit is in the box
with the relays. If you have purchased an additional wireless control system,
connect it according to the wiring diagram enclosed and the wiring diagram
of the winch.
Model A: for the STANDARD wireless remote
control
Tip: the battery is at the back. When the remote control is not in use, turn it
off. Keep the remote control in a dry place.
Model B: for the XT + wireless remote control
(with the switch)
Tip: the battery is at the back. When the remote control is not in use, turn it
off (the signal light is off). Keep the remote control in a dry place.
Model C: for wireless XT remote control (without
the switch)
Tip: the battery is at the back. When the remote control is not in use, turn it
off (the signal light is off). Keep the remote control in a dry place.
Model D: for the PROFI wireless remote control
Tip: the remote control is in a rubber case. The battery is at the back. When
the remote control is not in use, turn it off (the signal light is off). Keep the
remote control in a dry place.
Model E: for PW12000XT-HD wireless remote
control
Tip: unplug the cord from the socket on the winch and disconnect the remote
control (transmitter) from the cord. The battery is at the back. When the
remote control is not in use, turn it off (the signal light is off) as well as the
control unit (red button on the relay box). Keep the remote control in a dry
place.
When you are not using the winch, always turn off the remote
control (transmitter) and the control unit itself (red button on
the relay box, if present). Otherwise the remote control bat-
tery may be discharged and the winch may start accidentally.
ALWAYS turn off the remote control between successive uses
of the winch, even when the interval between them is short.
ALWAYS unplug the wired remote control before using the
wireless remote control.. If you use the wired remote control,
ALWAYS turn off the wireless control (transmitter) and the
control unit (button on the relay box – , if present).
DO NOT allow children to play with any of the remote controls
for the winch.
Almost every POWERWINCH winch is equipped with a radio control system as
standard. If your remote control has been damaged or the transmitter has
been lost, contact your supplier.
•
Before you pull the vehicle out, ALWAYS put the vehicle’s
gearbox to idle. Otherwise it may be damaged. If your
vehicle has an automatic transmission, refer to the vehicle’s
manual or contact the manufacturer.
•
NEVER attach the hook directly around the rope after
wrapping the anchor point, e.g. a tree, with the rope. This
will permanently damage the rope and may result in its
breaking.
•
BE CAREFUL that the rotating drum does not catch
fingers, jewellery, loose parts of clothing or hair. It is best
not to approach the rotating drum at all.
Radio control
switch (on the
transmitter)
Radio control
switch (on the
receiver)
Warning!
Po wer swit ch
Please t urn off
the power switch
when not in use
REMOTE
CONTROL OFF
REMOTE
CONTROL ON
WARNING.
Please always
turn the remote
control off when
it is not in use.
ON
OFF
H
an
ge
r
THE SIGNAL LIGHT
IS OFF
THE SIGNAL LIGHT
IS ON
Press and hold both
“IN” and “OUT”
buttons simultaneo-
usly to turn the
remote control on/off.
The signal light
indicates the status:
IT SHALL GLOW (ON)
OR FADE (OFF).
Button for switching
the remote control
on/off. The signal light
indicates the status:
IT SHALL GLOW (ON) OR
FADE (OFF).
THE SIGNAL LIGHT
IS OFF
THE SIGNAL LIGHT
IS ON
Radio remo te con trol
SWITCH-ON BUTTON
ROPE UNWINDING
BUTTON “OUT”
SWITCH-OFF BUTTON
ROPE WINDING BUTTON “IN”