POWERWINCH PW2000 Скачать руководство пользователя страница 2

powerwinch.eu

3

Thank you for purchasing POWERWINCH – and congratulations on the good choice. We hope that it will 

be useful for a long time and that each use will be a helpful experience.

Read the following manual carefully. Keep it in an easily accessible place near the winch so that you can consult it when in doubt. Follow all the 

rules when installing the winch, connecting it to the electrical system, and operating it.

General safety rules

1. Correct clothing:

 

DO NOT wear loose fitting clothes or jewellery as they can 

be caught in the movable parts of the winch

 

Use protective gloves when working with the rope. Never 

grab the rope with your bare hands..

2. Keep a safe distance

 

Do not get too close to the rope

 

Make sure that there are no bystanders within a distance of 1.5 times 

the length of the rope. This is a safety measure in the event of a rope 

breaking, which could cause serious injuries or even death.

 

Never cross or stand over a stretched rope

 

Maintain a stable body posture, and be careful not to fall on or under 

the rope

3. Take care of the remote control cord

 

NEVER carry or move the winch using the cord. Do not pull the cord to 

take the remote control plug out of the socket

 

Keep the cord away from sources of high temperature, 

oil and sharp edges

 

4. Do not overload the winch

 

If the motor warms up to such a temperature that it cannot be to-

uched, stop working immediately and allow it to cool down

 

Stop working immediately when the motor stops because it is unable 

to pull a load that is too heavy; use a pulley block and wait until the 

motor cools down

 

Do NOT exceed the specified maximum pulling force of the winch; 

avoid jerking 

 

 

Prior to working with the winch, please become acquainted with the safety rules and apply them, in the interests of personal safety as well as 

that of any bystanders. Any improper use of the winch can lead to property damage, human injury or even death.

Do not disregard the first start of the winch. Only in this way you can calmly get to know it and understand its operation.

Never operate the winch under the influence of alcohol, drugs or medicines. If you are below the legal age for operating the winch, use only in 

the presence of a legal guardian.

Read all of the booklet 

carefully

Danger

Use personal protective 

equipment

Use protective gloves

There is a risk of limb 

damage

Use a strap to hook 

Insulate all cords 

and connections

Attach the hook 

properly to the load

The rope must always 

be wound from the 

bottom of the winch

Do not put wires 

on sharp edges

Do not lay cords next 

to movable parts

Do not use for lifting 

loads

Do not use for 

transporting people

Risk of injuries 

to limbs

Do not attach the hook 

around the rope

Explosion hazard

Fire hazard

Do not use to secure 

a cargo

Risk of burns

Do not wind the rope 

over the drum from 

above

Содержание PW2000









Отзывы: