Configuration
18
Powerware
®
5119 Rack Mount User’s Guide
:
www.powerware.com
C A U T I O N
DO NOT press the Off
button while the UPS is in Configuration mode; pressing
the Off
button removes all power to your equipment.
1.
Press and hold the On button and the
button
simultaneously for one beep. The UPS switches to
Configuration mode.
2.
Press the On button to scroll through the options. Each time
you press the button, the UPS beeps. The LED for the selected
option blinks (see Figure 18 and Table 1).
If you press the On button and nothing happens, the UPS is
still in Operation mode. Repeat Step 1 for one beep ONLY to
enter Configuration mode, and then perform Step 2.
3.
Press the
button ONCE to toggle the selected option on or
off. The Power On indicator corresponds with the current
setting.
Repeat Steps 2 and 3 for each option.
4.
Press the On button and the
button simultaneously to
return to Operation mode at any time. Scrolling past the last
LED also returns the UPS to Operation mode.
1
Press the On button
to scroll to the next option.
Press the On and Test/Alarm Reset
buttons simultaneously to toggle between
Configuration and Operation mode.
Press the Test/Alarm Reset
button to toggle an option on or off.
&
4
2
3
Power On Indicator
LEDs
Figure 18. Using the Configuration Mode
NOTE
The front panel is rotated clockwise 90 degrees on some models.
