TECHNICAL SPECIFICATIONS
Step 2: Attach dust covers
Insert dust cover into the rackmount ear screw holes that are
not being used.
CONNECTION #1 : POWER MODULE(UPS) WITH ONE
BATTERIES MODULE
Rotate the battery cable retention bracket and tighten the two
screws to fix battery cable on the Power module and Batteries
module.
CONNECTION #2 : POWER MODULE(UPS) WITH MULTIPLE
BATTERY MODULES
Step 1: Use the battery cable to connect the 2nd Batteries module
to the 1st Batteries module.
Step 2: Rotate the battery cable retention bracket and tighten the
two screws to fix battery cable on 1st batteries module and 2nd
Batteries module.
VERTICAUTOWER INSTALLATION
Step 1: Attach the base stands
Tighten the screws (M5X12*8pcs) of the base stands (rackmount
ears) onto the bottom of the batteries module.
KO1-C000785-00
Battery Installation and replacement
Step1 : unscrew and remove the top cover from the battery module
Step2: unscrew and unplug steel straps from the battery module
Step3: remove the battery pack from the module
Step4: open the battery pack and replace the batteries
Model
BPH AT24R-4
BPH AT48R-8
BPH AT72R-12
Battery
Sealed Maintenance Free
12V / 9Ah x2pcs
12V / 9Ah x4pcs
12V / 9Ah x6pcs
Lead Acid Battery
x2sets
x2sets
x2sets
Rated Battery Voltage
24Vdc
48Vdc
72Vdc
Overload Protection
Fuse
Physical
Dimensions
(HxWxD)
88x438x430
mm
88x438x610 mm
Weight (kg)
15.10
24.60
36.02
Environment
Operating Temperature
0°c to 40°C
Relative Humidity
0 to 90% (Non-condensing)
Step5: the accumulating block b lower cover.set the steel straps and
the top cover again.
3
4
For more information, visit
www.powerwalker.com
All rights reserved. Reproduction without permission is prohibited.
