5
2. Installation
2.1 Installation Safety Instructions
Installation Personnel
Installation Environment
Do not install and operate the Charger when water
condensation happen which may occur if the Charger is moved
directly from a cold to a warm environment. The Charger must be
absolutely dry before being installed and operated. Please allow an
acclimatization time of at least 2 hours. Otherwise there is hazard of
electric shock!
Do not install the Charger in the environment where it is damp
or would be exposed to direct sunlight or near heat. Ensure the
Charger is far away from water, inflammable gas and corrosive
agents.
Do not block air vents in the housing of Charger. The Charger
must be installed in a location with good ventilation. Ensure enough
space on each side for ventilation.
This product must be installed only by qualified or
professional
personnel
according
to
safety
instructions!
You must read the following safety instructions before
installation!
