：
Gesture control switch
There are three types of gesture controls when this switch is enabled.
：
Enable or disable Follow
：
Take a photo
：
Start or stop video recording
3.
Settings
：
Gimbal settings
a.
Follow Mode
1
）
.Follow: The roll axis is locked, and the tilt axis and the yaw axis follow the move-
ments of the device.
2
）
.Tilt Locked: The roll axis and the tilt axis are locked, and the yaw axis follows the
movements of the device.
3
）
.FPV: The roll, tilt, and yaw axes all follow the movements of the device.
b.Sport Mode Switch: Enables and disables sport mode. When this switch is enabled,
A magnetic universal phone mount cannot be attached to the phone case, or it
may impact the gimbal's functionality and the phone's wireless charging function.
If the magnetic universal phone mount is not properly aligned with the phone's
wireless charging output, the phone may be unable to use the wireless charging
function.
the follow speed increases.
c.Zoom Speed: Controls the zoom speed of the zoom slider.
d.Handle Speed: Adjust the control speed of 5-Way button
e.Horizontal Reverse Switch: When this switch is enabled, if you push the handle left
or right, the gimbal's yaw axis will move in the opposite direction of your actual
movements.
f.Vertical Reverse Switch: When this switch is enabled, if you push the handle up or
down, the gimbal's tilt axis will move in the opposite direction of your actual move-
ments.
g.Gimbal Auto Calibration: When the gimbal encounters unexpected horizontal
skewing or drifting, this function automatically recalibrates the gimbal.
h.Gimbal Fine-tuning: This function allows the gimbal's horizontal level to be
fine-tuned.
：
General Settings
Manage current connection settings and view setting names, firmware version, and
device serial number, etc.
4
、
Exposure Parameters
：
Real-time display of the current shutter speed, ISO and EV values.
5
、
Zoom
：
Shows the current zoom ratio.Use the zoom function to zoom in
or out.
6
、
Shooting Mode
Swipe to choose different shooting modes
Timewrap: The phone shoots a time-lapse while in motion.
Timelapse: Includes normal time-lapse and Motionlapse.A normal time-lapse requires
setting the time interval and length of time. For Motionlapse, you can also set up to 4
gimbal positions.
Slowmotion: Chooses a frame rate to shoot in slow motion.
Video: Shoots regular video.
Photo: Takes photos.
Panorama: Uses the gimbal to automatically shoot a panoramic photo. Supports 3*3,
240°, and clone modes.
7
、
Media Library
：
View local media library resources.
8
、
Exposure Parameter Settings
：
Adjust exposure parameters.
9
、
Camera Button
：
Press to start or stop shooting.
10
、
Shortcut Function Menu
：
Different shooting modes have different parameter. Visit the App shooting
page for more details.
11
、
Front/Rear Camera Switch
：
Press to switch between the front and rear cameras
12
、
Tracking Mode
：
Tracking mode helps you to keep your target in the center position in the
frame while photographing or recording.Tracking mode can be enabled using three
methods:
a. Short press the 5-Way button and PowerVision S1 will automatically start tracking
the object in the center of the frame. Press the 5-Way button again to deactivate
object tracking.
b. Manually draw a box on the screen to choose an object to be tracked. Press the
tracking icon to deactivate object tracking.
c. Enable gesture recognition in the status bar of the shooting page. Show the
camera lens with the "Five" gesture and the system will automatically recognize the
object and start tracking it. To deactivate object tracking, make the same gestures to-
wards the camera lens.
13
、
Focus Frame
：
Focus frame
14
、
Gimbal Battery Level
：
Shows the gimbal's current battery level.
15
、
Gimbal Mode
：
Shows the current gimbal mode.
Note: Camera setting functions may differ depending upon the phone model you are
using. Actual supported functions may vary.
14
(1)
Clean the back of the phone.
(2)
Align the center positioning card with the back of your phone, and the mag-
netic universal phone mount's circular magnetic area with the center of the
back of the phone.
(3)
Apply pressure to the attached magnetic universal phone mount for 30 s
and ensure that it is flat.
(4)
Remove the center positioning card and wait for one hour before using the
gimbal.
Align the circular logo area with the gimbal's magnetic mounting plate to com-
plete the attachment process.
