PowerTrunk DT-400, Руководство пользователя

Страница: 35 / 48

User Manual
35
en
All the audio and voice signalling is disabled in this working mode, except the tones for
establishing, maintaining and ending calls.
9.4 Security
The equipment has the following security services:
- PIN code
From the User settings/PIN code menu you can enable or disable the request for a PIN
code on turning on the equipment as well as modify this code.
- Authentication
MDT-400 / DT-410 supports the authentication of the radio equipment by the
infrastructure, which ensures that the user trying to connect to the network has a valid
permission to do so.
This service requires the equipment to have its corresponding code installed.
To change the code you must contact your Service Provider.
- Remote enabling / disabling of the equipment.
The MDT-400 / DT-410 can be enabled or disabled from the infrastructure, through the
air interface.
This disablement can be
temporary or permanent .
Recovery of a temporally disabled unit is carried out by the infrastructure. In the case of
permanent disablement contact your Service Provider to have the equipment put back
into operation.