PowerTrunk DT-400, Руководство пользователя

Страница: 13 / 48

User Manual
13
en
5.2 Working modes.
1. There are three working modes: network mode (V+D), direct mode (DMO) and DMO-
GATE mode. In network mode (V+D), the equipment will be operational when the system
has been successfully registered. Then the display will show the symbols (Valid
network indicator) and (signal level indicator).
2. During the system registration and network access process, the SVC LED will be lit up
continuously in red, and when a valid network is found it will flash and try to register into
it. When the register is complete, a characteristic programmable acoustic signal will be
heard, the SVC LED will turn green and the screen will display the message “In service”.
If the equipment is unable to access a network, the display will show “No service” and the
SVC LED will stay red. Even if the equipment has not registered, it is possible to access
the
Main Menu , to select the Direct working Mode, for example, without need for
infrastructure.
3. In DMO mode, the SVC LED will be green and the symbol (Direct mode active
indicator) will be displayed in the symbol line of the display (Upper line). In this mode, the
symbol (valid network indicator) is not displayed.
4. If the equipment has the DMO-GATE option available, this working mode can be
selected, which will enable the transfer of group calls from the network to terminals in
DMO mode and vice versa.
5. The equipment may be configured to start in any of the available modes or it is possible
to change the mode manually through the “Working modes” menu.
D