PowerTrunk DT-400, Руководство пользователя

Страница: 34 / 48

User Manual
34
en
Group calls
To start a group call in DMO mode, select the group with the navigation arrows keys and press
PTT. The operation is similar to a group call in network mode.
Individual calls
To start a private call, first dial the destination number or select it from the phone book. Then
press PTT.
9.3 Working modes: DMO-GATE mode
This section describes the DMO and V+D functionality supported by MDT-400 working in
DMO-Gateway mode.
To access DMO-Gateway mode, select the
Working modes/Gateway menu or press the
rapid access F + #.
In this working mode, the MDT-400 will act as a bridge in the communications between
equipment in DMO mode and the infrastructure.
All the supplementary services are disabled in this working mode. The Data Packet
Transmission service is also disabled, as is the sending and receiving of status and text
messages, by both the user and the application.
DMO-GATE enables communication between DMO and TMO in end to end encrypted mode.
The only phone book that exists in the equipment working in this mode is an assignment table
where a group configured in V+D is matched to another group configured in DMO.
The same groups stored in the group phone book are used.
The programming tool creates the DMO - V+D matching.
The scanning lists are not enabled.