Powerten D3 Series, Руководство по эксплуатации

Страница: 16 / 65

Table 1-3
Available Voltages and Currents
V Out
2KW 3KW 3.3W 6.6W 10KW 13.3W 16.6W 20KW 5KW 10KW 15KW 20KW 25KW 30KW PS1 PS2
5 325 500 1000 1500
2000 2500 3000
500 500
8 250 350 400 800 1200 1600 2000 2400 400 400
10 200 300 330 660 1000
1300 1650 2000
330 330
12.5 265 530 800 1060 1325 1600 265 265
15 130 200 220 440 660
880 1100 1320
220 220
20 100 150 166 330 500 665 830 1000 166 166
25 132 265 400 520 650 800 132 132
30 66 100 110 220 330 440 550 660 110 110
40 50 75 83 166 250
330 415 500
83 83
50 40 60 66 133 200
265 330 400
66 66
60 33 50 55 110 166
220 275 330
55 55
80 25 37 62 125 187 250 312 375
100 20 30 50 100 150 200 250 300
120 16 25
130 38 76 115 153 192 230
150 13 20 33 66 100 133 166 200
200 10 15 25 50 75 100 125 150
250 8 12 20 40 60 80 100 120
300 6.6 10 16 33 50 66 83 100
400 5 7.5 12 15 37 50 62 75
600 5.5 11 16 22 27 33
Note:
- Dual output supplies are available
in the P63 (3U) chassis with a
combination of any two voltages
and 3300 watts per voltage.
150 mV
P60, P80, D3
120V
5-15V
30 mV RMS
30 mV RMS
Output P-P Ripple - Typical
20-60V
80V
175 mV
200 mV
50 mV RMS
50 mV RMS
50 mV RMS
135 mV
125 mV
225 mV
* P-P noise is measured across a 1 uF capacitor at the end of a 6’ load cable with the supply
operating at full load and at nominal input line voltage.
** RMS noise is measured directly across the output terminals with the supply operating af full
load and at nominal input line voltage.
3300 RATING
100 mV
50 mV RMS
75 mV
50 mV 30 mV
45 mV
60 Low Noise
400V
100V
150V
200V
250-300V
P
*
* *
M550001-01
1-6