Page 6 — English
PRODUCT SPECIFICATIONS
Fuel Tank Capacity ................................................................................................................................... 1.17 liter (0.31 gal.)
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 3,100 psi
Maximum Gallons Per Minute* ................................................................................................................ 9.09 LPM (2.4 gpm)
Maximum Inlet Water Temperature ......................................................................................................................
40˚C (104˚F)
*Max. rating determined by PWMA Standard 101
KNOW YOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
189cc OHC ENGINE
This engine enables the pressure washer to achieve 3,100 psi
(pounds per square inch) at a rate of 9.09 LPM [2.4 gpm
(gallons per minute)].
AUTOMATIC SOAP INJECTION SYSTEM
Pour pressure washer detergent into the soap tank to apply
detergent quickly and easily to your cleaning project. Use
of the soap nozzle will activate the soap injector at a 20:1
dilution ratio.
BATTERY MAINTAINER CHARGER
When storing the pressure washer, connect the battery
maintainer charger to keep the battery fully charged and
ready for use. If the battery’s charge is depleted, the Electric
Start feature will not function.
NOTE:
The pressure washer engine does not charge or
maintain the battery as it runs.
ENGINE SWITCH
The engine switch is used either alone or in combination
with the starter grip and rope to start the pressure washer.
FUEL TANK
This fuel tank has a maximum capacity of 1.17 liter (0.31 gal.).
Use unleaded automotive gasoline in the engine.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the back
of the machine using the stretch strap to secure in place.
SOAP NOZZLE
The blue soap nozzle is used to apply detergent at low
pressure only.
STARTER GRIP AND ROPE
The starter grip and rope is pulled to start the machine.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
NOTE:
This tool is heavy. To avoid back injury, lift with
your legs, not your back, and get help when needed.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
FEATURES
ASSEMBLY
Содержание PS8C310E
Страница 24: ...Page 20 English NOTES...
