Powersmart PS8212, Инструкция по эксплуатации, Страница: 10 / 19

10
WARNING:
Do not use this product if any parts on the packing list are already assembled to your product
when you unpack it. Parts on this list are not assembled to the product by the manufacturer
and require customer installation. Use of a product that may have been improperly
assembled could result in serious personal injury.
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with
this product. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
INSTALLING THE FRONT HANDLE
Install the left holder and right holder of front handle on two side of the tube,
then secure with two screws, attach the front handle to the middle of the
holder and align the slot . Then insert the bolt through the hole of holder and
front handle, Tighten the knob with your hand and tighten the two screws of
holder with the screwdriver (See Fig. 1).
INSTALLING THE GUARD AND PROTECTOR
Align the hole of guard and the screw of shaft, press the guard to shaft.
Then place the press plate of guard in other side, and make sure the
direction of slot is upward located on the press plate ( See Fig. 2-3).
Secure the connection with the two screws (See Fig. 3).
Fig. 1
Fig. 2