Important information
Ireland & Northern Ireland
22
The appliance is designed to be permanently installed with a three-pin power cord and
may only be connected by a licensed expert in accordance with the connection diagram.
Only a qualified electrician who takes the relevant regulations into account may replace
the power cord.
Do not use multiple plugs, power strips or extensions. Overloading causes a risk of fire.
If the connection is no longer accessible following installation, an all-pin isolating switch
with a contact gap of at least 3mm must be provided.
Do not connect the appliance using a 13 A plug or protect it with a 13 A fuse. The appli
-
ance must be protected using a fuse that is rated 16 A or higher.
The appliance must be disconnected from the power supply during all installation work.
When the appliance is installed, protection must be provided against accidental contact
in the future.
Connect the wires of the mains power cord in accordance with the
following colour coding:
Green and Yellow
Earth wire (E)
Blue
Neutral wire (N)
Brown
Live (L)
