Installation Instructions
Important note
Electrical Connectors
21
The kitchen cover must be suitable to ensure that the oven works properly.
The panel of kitchen equipment adjacent to the oven must be made of heat-resistant
materials. Kitchen equipment made of plywood shall ensure that the glue can withstand
a temperature of at least 120 degrees Celsius. When plastic or glue cannot withstand this
temperature, the equipment will melt and deform.
Once the oven is placed in the kitchen equipment, the electrical components must be
completely insulated. This is a statutory safety requirement.
All furnace covers must be firmly fixed in place and cannot be removed without using
special tools.
Remove the back of the kitchen equipment to ensure the full circulation of air around the
oven.
The oven rack must have at least 45 mm rear clearance.
Because oven handle and sheet metal parts are easy to cut, installers need to wear
gloves for installation.
The wiring of oven must be equipped with all-pole disconnection device according
to the wiring rules.
After installing the appliance, it is necessary to have other methods to disconnect
the power supply. The power supply is disconnected by a contactable plug or by a
fixed wiring switch that meets the wiring requirements.
WARNING!
