manualshive.com logo in svg

PowerPlus Energy ECo 4840P, Инструкция по установке и эксплуатации, Страница: 37 / 37

Поделиться
Скачать
PowerPlus Energy ECo 4840P Скачать руководство пользователя страница 37

11. End of Life 

When a PowerPlus Energy battery is removed from service it can be returned to PowerPlus Energy for 
recycling.  

Due to the stability and longevity of LFP cylindrical cells, returned batteries will be refurbished and checked 
so they can be repurposed for low power applications and made available for community, education and 
charity projects.  

Any Lithium cells not suitable for repurposing will be sent to a licensed recycling facility, where all ferrous 
and non ferrous metals are separated and then forwarded to our metals recycling partner.  

12. Warranty 

PowerPlus Energy will protect this product under warranty when it is installed as written in this manual and 
used as set out in the warranty documents.  Any product not being used or installed as outlined will be in 
violation of the terms and will render the product void of any warranty. 

PowerPlus Energy does not cover warranty or any liability for damages or defects caused or from the 
following: 

• Incorrect storage or transportation. 
• Incorrect installation and wiring. 
• Installed not according to this manual. 
• Incorrect operation. 
• Inappropriate environmental conditions when operating the battery. 
• Failure to follow safety requirements. 
• Tampering of or opening the battery. 
• Unauthorised repairs or modifications. 
• External influences such as physical damage, over charging or electrical damage. 
• Used outside of warranty terms and conditions.

 Eco P Series Installation Manual V3.0

21/10/2021 

 

    Page 

 of 

37

37

+61 3 8797 5557
Building 21-25, 885 Mountain Hwy
Bayswater Vic 3153
PO Box 4407, Knox City Vic 3152
[email protected]

Содержание ECo 4840P






































Отзывы:

Нет отзывов