PowerMax TDM-105S, Руководство пользователя

Страница: 17 / 23

www.powermaxfitness.net 17
5. DRIVING BELT ADJUSTMENT
All the treadmills’ driving belts are adjusted before leaving the factory, but after using for a
period, it may still occur slip, which is mainly adjusted by users. Adjustment steps (see the
picture):
1. Clockwise rotate adjustment screw with spanner.
2. Adjustment scope is subject to no slip when loading.
Notice: Periodically clean the impurities in the belt groove and the belt wheel groove.
6. Treatment method of running belt slip or pause
First open the front motor cover, then open the treadmill, hold the hand grip with both hands,
step on the belt hard with your feet, watch it is the conveyor belt of the motor that pauses or
the running belt that pauses. If running belt pauses, adjust the running belt, while if conveyor
belt of the motor pauses, adjust the motor.
7. Self-add oil using
once using treadmill reach to 150KM/H, the oil pot will be bouncing on the treadmill display
which remind user to add oil. after add oil, please press "select " key and speed+ at the same
time until hear the drops of sound of the treadmill (in the ready mode) now the add oil reminder
will go to zero and restart the cumulative.
FREQUENTLY ASKED QUESTIONS
Fault Code Main reason Solution
E01
The wire from computer to bottom
control board didn’t connected well
1
．
Check the connection wire between
computer and control board was well
connected.
2
．
Make sure the IC on the control board was
well inserted. If not re-insert.
3
．
Abnormal power supply in control board.
Please change a new control board.
E02 Protect the exploding
1
．
Bad contact with motor open circuit.
Please change a new motor or check the
connector.
2
．
Power tube was puncture. Please change
a new Power tube or control board.
E05 Over current Protection
1
．
Overloaded
。
2
．
Running board with heavy resistance.
Need to be oiled
3
．
Damage in Motor. Change a new motor.
E06 Control board self-checking
E08 EEPROM damage Change the control board