PowerMax TDM-105S, Руководство пользователя

Страница: 9 / 23

www.powermaxfitness.net 9
Step 2
Electronic watch and hand grip tighten up the
hand grips on both sides with M8*20 screw
separately by making them pass through
handgrip hole and connected with the
uprights.
Step 3 (only for multifunction)
up and down U-shaped tube first place the rubber
protection sleeve at each side of U-shaped tube,
assembly 2 ends of U-shaped tube to iron plate of left
and right stand column with M8*40 screws, lock with
nuts (special attention, the middle screw hole of U-
shaped tube point to the bevelled-up direction-tube
should not trap the L iron. Put on the above it's
approved. Down U-tube with foam, and upper without
it) see on the right picture
Step 4 (only for multifunction)
Functional frame uses two M8*40 screws to fix the
functional frame on the top and bottom U tube.