www.powermaxfitness.net
20
Picture A Picture B
Multi-wedge Belt Tension Adjusting
When you use the treadmill for a long time, the multi-wedge belt becomes loose because of the
abrasion, then you have to do some appropriate adjustment to facilitate the safe use.
Judgment: the feeling of running with the occasional pause phenomenon, which indicating that
the treadmill belt or multi-wedge belt are a little loose and further affirmation need to be made.
Method of judging which part is loose: Remove the four screws on protective cover, make the
treadmill run at a speed of 1 km/h, and then stand on the running belt, grip the armrests, and
tread the treadmill belt slightly. (we advise treading the treadmill belts with the user's own weight)
A.
The instantaneous step cannot stop the belt, the tightness is appropriate.
B.
If your instantaneous step stops the running belt, but the multi-wedge belt and former
roller is still running, it indicates that the running belt is loose and appropriate adjustments
must be made to facilitate the safe use
C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop,
but the motor is still running, it indicates that the multi-wedge belt is loose and appropriate
adjustments must be made to facilitate the safe use
Step 2:
Use a wrench to adjust the screws on the motor base according the condition. Meanwhile,
gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose, you
can flip the multi-wedge belt by 100%; if it is too tight, the degree for you to flip the belt is very
limited. It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust the
tightness of the multi-wedge belt into the state that it could be flipped by 80%.
Step 3:
Finally lock the motor base, and install the front cover.
