www.powermaxfitness.net
19
too loose, it may occur slip between the belt and the roller when treading on the belt; but if too
tight, it will be easy to increase the motor load and damage motor, running belt, roller, etc.
4. Running belt deviation adjustment
All treadmills’ belts should be adjusted before leaving the factory and after the installation,
however, after it is used for a period, it may occur belt deviation, which is caused by the following
reasons:
•
The main engine is not placed evenly.
•
The user’s feet are not on the
centre of running belt.
If the deviation phenomenon is caused by the uneven force of the user’s feet, no
-load rotation
for a few minutes ca
n make it normal. For deviation phenomenon that can’t return to normal
automatically, adjust step by step by using 6MM inner hexagon spanner with the machine and
with quarter-circle as the unit. Running belt deviation is not covered in the warranty scope and is
mainly maintained by users according to the instruction book. Deviation phenomenon will
severely damage the running belt, so it should be found and corrected in time.
5. Driving belt adjustment
All the treadmills’ driving belts are adjusted before
leaving the factory, but after using for a
period, it may still occur slip, which is mainly adjusted by users. Adjustment steps (see the picture):
1. Clockwise rotate adjustment screw with spanner.
2. Adjustment scope is subject to no slip when loading.
Notice:
Periodically clean the impurities in the belt groove and the belt wheel groove.
6. Treatment method of running belt slip or pause
First open the front motor cover, then open the treadmill, hold the hand grip with both hands,
step on the belt hard with your feet, watch it is the conveyor belt of the motor that pauses or the
running belt that pauses. If running belt pauses, adjust the running belt, while if conveyor belt of
the motor pauses, adjust the motor.
