www.powermaxfitness.net
15
3.
DIS display window
: DIS window shows running distance, displays 0.00 99.90
forwardly, recount time from zero when time pass; Distance countdown show the set
to zero contrarily, the treadmill stops when countdown to zero and DIS window shows
End, then machine will enter readiness modes in 5 minutes after dead stop.
4.
CAL display window
: CAL window displays calories consumption. It displays forward
calories of 0.0-999.0, recount from zero once the calories are over. Calories window
also has countdown function, after complete stop, the device enters standby mode
in 5 minutes.
5.
PUL/INCILINE display window:
PUL display window shows heart rate, the sensors on
the handrails monitors the runner' s heart rate and displays from 50 to 200BPM on
the window. Inclines window displays incline percentage degree range from 0 to 15
II. PRESS BUTTON
1.
PROG key is program button, window displays P01-P02- P12-FAT circularly for runner
selection once PROG button is pressed. P01-P12 is built-in program FAT is for fat content
measure.
2.
MODE key is for mode selection, window displays 4 models of 0:00, 15:00, 1. 0, 50.0
circularly for runner selection. 0:00 is manual mode, 15:00 is time countdown mode, 1.0
is distance countdown mode, 50. 0 is calories countdown mode. Runner can adjust speed
and incline at mode selection, press START button to start treadmill after mode setting
finished.
3.
START key is to start running, user can start treadmill running by pressing the button
anytime in the condition of safe key pull on.
4.
STOP key is to stop running, treadmill stops running and enters reset when the STOP
button pressed.
5.
SPEED+, SPEED- keys are for speed plus or minus. User can adjust speed before or after
running start, the distance gap is 0. 1km each press, distance will increase or decrease
continuously if press the button more than 0.5 second.
6.
, INCLINE- These 2 buttons are for incline plus or minus, User can adjust incline
before or after running start, the incline gap is 1% each press, incline will increase or
decrease continuously if press the button more than 0.5 second.
7.
SPEED keys, there are 4 quick speed keys of 3, 6, 9, 12KMH on the console, user can set
or change speed quickly by pressing the button.
8.
INCLINE keys, there are 3 quick incline buttons of 3, 6, 9, press the key, user can set and
change degree percentage of incline.
