www.powermaxfitness.net
16
9.
At standby status, press SPEED+ and SPEED- over 3 seconds, window will display
distance, then press STOP key more than 3 seconds total distance will reset.
III. QUICK CONTROL BUTTONS (MANUAL MODE)
1. Turn power switch, then pull magnetic safe key on the safe key one the safe key position
of white circle below console.
2. Press START key, system enters into countdown and windows displays 3 seconds
countdown, the buzzer makes a sound, 3 seconds later, treadmill begin to run at speed of
1 KM per hour.
3. User can adjust via pressing SPEED+, SPEED-, either adjust incline by pressing INCLINE-f-
, INCLINE- after treadmill start.
IV. CONSOLE OPOERATION IN MOTION
1. Press SPEED- button, treadmill will decrease speed
2. Press SPEED- button, treadmill will improve speed
3. Press INCLINE- button, treadmill incline will increase
4. Press button, treadmill incline will decrease
5. Press STOP button, treadmill will slow down till stop
V. MOBILE MODE
1. Press START button at standby status, treadmill begin to run on 0 incline at 1.0KMH speed,
other windows begin to count forwardly, user can change incline and speed by pressing
, INCLINE- or SPEED+, SPEED-.
2. Press MODE button at standby status, the device enters countdown mode, TIME window
displays 15:00 and twinkles, then press , INCLINE-, or SPEED+, SPEED-, user can set
running time range from 5:00 to 99.9 minutes
3. Press MODE at time countdown status, enters distance countdown mode, DIS window
shows 1.00 and twinkles, user can set running distance of 0.50-99.9 KM via press any buttons
of , INCLINE-, SPEED+ or SPEED-.
4. Press MODE at distance countdown status, enters calories countdown mode, CAL windows
show 50.0 and twinkles, user can set calories consumption by press any button of ,
INCLINE-, SPEED+, SPEED-, the setting scope of calories is 10.0-999.0.
5. After any countdown setting finished among 3 countdown modes in all, then press START
button, the running belt begin to move in 3 minutes, user can adjust incline and speed
separately by pressing , INCLINE-or SPEED+, SPEED-, press STOP button and
running belt stop move.
