background image

 

Warranty and Service 

Walter Meier (Manufacturing) Inc., warrants every product it sells. If one of our tools needs service or repair, one of our 
Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter 
Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance 
and major repair on your POWERMATIC

®

 tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. 

MORE INFORMATION 

Walter Meier is consistently adding new products to the line. For complete, up-to-date product information, check with your local 
Walter Meier distributor, or visit powermatic.com. 

WARRANTY 

POWERMATIC products carry a limited warranty which varies in duration based upon the product. 

 

WHAT IS COVERED? 

This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives 
and other consumables are excluded from warranty coverage. 

WHO IS COVERED? 

This warranty covers only the initial purchaser of the product. 

WHAT IS THE PERIOD OF COVERAGE? 

The general POWERMATIC warranty lasts for the time period specified in the product literature of each product. 

WHAT IS NOT COVERED? 

The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five 
Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does 
not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or 
alterations, or lack of maintenance. 

HOW TO GET SERVICE 

The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the 
location nearest you, please call 1-800-274-6848. 
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our 
inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. 
We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the 
defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the 
product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the 
return. 

HOW STATE LAW APPLIES 

This warranty gives you specific legal rights; you may also have other rights which vary from state to state. 

LIMITATIONS ON THIS WARRANTY 

WALTER MEIER (MANUFACTURING) INC., LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED 
WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY 
AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY 
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. 
WALTER MEIER (MANUFACTURING) INC., SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR 

PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE 
OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. 
Walter Meier sells through distributors only. The specifications in Walter Meier catalogs are given as general information and are 
not binding. Members of Walter Meier reserve the right to effect at any time, without prior notice, those alterations to parts, 
fittings, and accessory equipment which they may deem necessary for any reason whatsoever. 

Содержание DS20





















Отзывы: