Powermatic 15S, Руководство пользователя

Страница: 12 / 48

12
ELECTRICAL CONNECTIONS
WARNING: Electrical connections must
be made by a qualified electrician in
compliance with all relevant codes. The
machine must be properly grounded to
help prevent electrical shock and
possible fatal injury.
A power plug is not provided with the 15S planer.
You may either connect a 230 volt plug or "hard-
wire" the machine directly to your electrical panel
provided there is a disconnect near the machine.
Consult electrical schematic on page 43 for
further clarification of wiring setup.
This machine must be grounded. Grounding
provides a path of least resistance to help divert
current away from the operator in case of
electrical malfunction.
Make sure the voltage of your power supply
matches the specifications on the motor plate of
the machine.
EXTENSION CORDS
The use of an extension cord is not
recommended for this machine, but if one is
necessary make sure the cord rating is suitable
for the amperage listed on the machine's motor
plate. An undersize cord will cause a drop in line
voltage resulting in loss of power and
overheating.
The chart in Figure 11 shows the correct size cord
to use based on cord length and motor plate amp
rating. If in doubt, use the next heavier gauge.
The smaller the gauge number the heavier the
cord.
!