1. Position the
PowerMate
®
as shown in "A"
close to the tailgate or rear of the vehicle
allowing room for the wheels of the
PowerMate
®
to clear the vehicle upon
raising.
2. Push the "LOAD DOWN" button to raise
the wheels until they rest on the vehicle
bed as shown in "B".
3. Push the "LOAD UP" button and raise the
toeplate/load to the vehicle floor as shown
in "C".
4.
When the load is in the retracted position,
as shown in "D", the
PowerMate
®
can be
positioned anywhere on the vehicle bed.
1. Locate the
PowerMate
®
as shown in "D"
with the wheels just far enough away from
the end of the tailgate/vehicle bed to allow
the L-1 outer frame to clear as it is lowered
as shown in "C".
2. Push the "LOAD DOWN" button to lower
the
PowerMate
®
toeplate and load to the
ground as shown in "B".
3.
Push the "LOAD UP" button to lower the
wheels to the ground, whereupon the
PowerMate
®
can be manoeuvred as
required.
Loading on a Vehicle
Unloading from a Vehicle
POWERMATE
®
OPERATION
PowerMate
®
Operation Manual
A
B
C
D
PN 011320 Rev.E
Eng. 04/ 25/ 14
3.03
