PowerMate
®
Operation Manual
L-SERIES POWERMATE CHARGING INSTRUCTION
INSTRUCTION:
1. Provide electrical power to the Battery Charger being used.
2. De-activate the PowerMate by depressing the Circuit Breaker Pedal located on top
of the Battery Box, moving the Circuit Breaker Toggle to the down (off) position.
Move the Control Toggle Switch to the "O"(Off) position.
3. Insert the Charger Male Plug into the Charging Receptacle located in the Battery
Box. The Plug may be secured in place with the intergral threaded locking ring. The
charge cycle is fully automatic.The Wall Charger and the In-vehicle Electronic
Charger will indicate the charge status by LED indicators. Refer to the specific
Charger documentation.
4.
To discontinue the charge cycle, dis-engage the Charger Male Plug from the
Charging Receptacle.
5.
The PowerMate
®
can be re-activated for use by moving the Circuit Breaker Toggle
to the on (up) position, and moving the Control Toggle Switch to the "I"(On) position.
NOTE: The PowerMate
®
can remain on the Battery Charger at all times, ensuring a
fully charged unit when called upon. In any case, the Circuit Breaker Toggle
should always be in the off (down) position when the PowerMate
®
is not in use.
Wall Charger
400211
In-Vehicle
Electronic
Charger
400217C/8C
Circuit Breaker Toggle
Battery Box
PN 011360 Rev.G
Eng. 04/ 18/ 18
3.01
Charging Receptacle
Control Toggle Switch
Circuit Breaker Pedal
Charger Male Plug
Locking Ring
