5
INSTALLER SAFETY INSTRUCTIONS
BEFORE INSTALLATION
▲
1. Check to see that the operator is proper for this
type and size of opening and its frequency of use.
If you are not sure, consult factory.
▲
2. Check to see that there are no structures
adjacent to the area, which may pose a risk of
entrapment when gate is opening or closing.
▲
3. Safety equipment such as electric edges or
photocell sensors must be installed to provide
personnel, equipment, and property protection.
For assistance in selecting the correct type of
safety equipment, consult the factory.
▲
4. You must install a pushbutton control or key
switch to allow for normal operation of the gate if
the automatic controls do not work. Locate the
pushbutton or key switch and small warning
placard within sight of the gate in a secured area
at least 10 feet or more from the gate and fence
to keep users away from the moving gate and
fence.
▲
5. Outdoor or easily accessed gate controls should
be of the security type to prohibit unauthorized
use.
6
DURING INSTALLATION
▲
1. Be aware of all moving parts and avoid close
proximity to any pinch points.
▲
2. Disconnect power at the control panel before making
any electric service connections. Connection
location for controls and safety equipment can be
found on the wiring diagram, and in this manual.
▲
3. Locate the controls at least 10 feet from the moving
gate so that the user can observe the gate operation,
but is not able to come in contact with the gate while
operating the controls.
10 FEET
