Powerleap PL/586 133, Руководство по установке

Страница: 17 / 30

Installing PowerLeap™ PL/586-133 13
PowerLeap™ Installation Guide
3
Remove the CPU:
•
If the CPU is installed in a standard socket, carefully insert a flat-bladed
screwdriver
between the CPU and the socket . Gently lever one side of the
CPU up slightly (refer to the figure below). Do not attempt to pry the CPU out of
the socket. Repeat for each side of the CPU, working around the CPU until the
pins are sufficiently exposed to allow you to lift the CPU out of the socket.
Be
careful not to break the pins.
•
If the CPU is installed in a ZIF socket, unlatch the sidebar lever, retaining screw,
or overhead bar. When the CPU is loosened, lift it out of the socket with your
fingers.
Figure 6. Removing the CPU (standard and ZIF sockets)
After removing the CPU, store it in the PowerLeap™ packaging.