PowerLand PDST24, Руководство пользователя

Страница: 9 / 28

9
Auger Control
The auger control is located on the left handle.
Squeeze the control grip against the handle to engage
the augers and start snow throwing action. Release to
stop.
Drive Control
The drive control is located on the right handle.
Squeeze the control grip against the handle to engage
the wheel drive. Release to stop.
Chute Directional Control
Regulate the plum-plastic-head nut to the rightside of
the direction cover,can regulate the height of direction
cover through loosing nut.
To adjust the chute in the middle, push the shaft
toward north and them turn left(See diagram 1) if
more the shaft toward northwest, the chute will turn
to the right.
Fuel Valve Lever
Fuel valve- Allows fuel to enter engine.
Clean-Out Tool
WARNING:
Never use your hands to clear
a clogged chute assembly. Shut off engine
and remain behind handles until all moving
parts have stopped before unclogging.
The chute clean-out tool is fastened to the top of the
auger housing with a mounting clip. The tool is
designed to clear a clogged chute assembly. Refer to
Operating Your Snow Thrower section for more
detailed information regarding the chute clean-out tool.
NOTE:
This item is fastened with a cable tie to the
rear of the auger housing at the factory. Cut the cable
tie before operating the snow thrower.
Skid Shoes
Position the skid shoes based on surface conditions.
Adjust upward for hard-packed snow. Adjust downward
when operating on gravel or crushed rock surfaces.
Recoil Starter Handle
The recoil starter handle is used to manually start the
engine.
Electric Starter Button
(If so equipped)
Pressing the electric starter button engages the
engine’s electric starter when plugged into a 120V
power source.
Electric Starter Outlet
(If so equipped)
Requires use of a three-prong outdoor extension cord
(packed with the snow thrower) and a 120V power
source/wall outlet.
Augers
When engaged, the augers rotate and draw snow into
the housing.
Chute Assembly
Snow drawn into the auger housing is discharged out
the chute assembly.
AUGER
CONTROL
GO
DRIVE
CONTROL
GO
CHUTE DIRECTIONAL CONTROL
DISCHARGE
LEFT
DISCHARGE
RIGHT
ADJUSTABLE
CHUTE TILT
ON
ON
OFF
FUEL VALVE LEVER
SWITCHCORD
SWITCHBOX
STARTER
BUTTON
POWERCORD
•
TO STARTER
•
TO OUTLET
120V A.C. APPLICATION